National Machinery Exchange, Inc. If it's machinery, we have it.SM

   
Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us
Facebook Twitter YouTube

60" x .500" x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione   Our stock number: 113948

60 x .500 x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione

Click on picture below for larger version
60 x .500 x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione60 x .500 x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione60 x .500 x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione
60 x .500 x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione60 x .500 x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione60 x .500 x 70,000# Herr Voss Injector Head Slitting Line w/ Strand Extensione

Material:
Hot Rolled Mild Steel
Hot Rolled Stainless Steel
Type 304 and 316

Thickness: 1.5mm (.060") Minimum - 12.7mm (.500") Maximum
65,000 PSI Shear Strength
Width: 750mm (30" Minimum -1550mm (61") Maximum
Coil Weight Capacity: 31 Tons. (70,000 Lbs.)

Receives Coils:
ID: 508mm - 760mm (20" - 30")
OD: 2100mm (82.7") Maximum - 1220mm (48") Minimum

Delivers Coils:
ID: 610mm (24")
OD: 2100mm (82.7") Maximum - 1220mm (48") Minimum

Line Speed:
45 Meters per Minute (148 FPM) Gear-In
90 Meters per Minute (295 FPM) Through Coil Build-Up


Complete Line With:

Entry Coil Car (Pit Type)
Cone Type Uncoiler with Dual Water Cooled Brakes, Sliding Base, Feed Up Drive,
Tapered Roller Bearing, Air Clutch, Fife Edge Control Unit
Coil Peeler with Powered Hold-Down Roll
Edge Guide System

5 Roll Powered Flattener with Entry Pinch Rolls
12" Diameter Entry Pinch Rolls
10" Diameter Work Rolls
80" Roll Face
Digital Roll Positioning
45 HP Motor

Crop Shear with Scrap Gate
Scrap Box
2 Roll Powered Edge Guide Unit

2 Injector Slitter Heads with Motorized Arbor Adjustments
14" Diameter Arbors
66" Arbor Face
250 HP DC Slitter Drive
Rotating Slitter Set-Up Stand
Auto Injector Head with Hydraulic Locking

Dual Scrap Winders with Auto Strip Feed System
Traversing Strip Clamp with Strand Separator for Feed Up

Drag Pad Tension Stand (New in 2013)
Strand Extensioner
Model: VKSE 72/3.5-7/5 4HI
Capacity: 8mm (.315") Thick, maximum
7 work Rolls (3 Over 4 Arrangement)
3.5" Diameter Work Rolls
5 Flights Top & Bottom Back Ups
5 Top Flights have Individual Motorized Adjustments
Digital Read-Out Work Roll Positioning
2 Sets of Controls
Spare Work Rolls and Back-Up Rolls

Exit Crop Shear
Passline Deflector Roll
Exit Edge Guide System
Pivoting Threading Clamp for Strip Feed into Recoiler

Recoiler
24" Full Hydraulic Drum
Hydraulic Push-Off
Hydraulic Sliding Base
2 x 150 HP DC Motors (300 HP Total)
Overarm Separator/ Hold-Down Roll

Exit L Type Coil Car with Coil Holders

Tooling 20mm & 30mm Knives (Some New Knives)
20mm Knives: 6 sets of 30 = 180 Knives
1 New Set of 30 Knives
20 Near New Sets of 60 Knives

30mm Knives: 3 sets of 30 = 90 Knives
2 Near New Sets of 60 Knives

Hydraulic Pumping System

Spare Parts:
Separator Arbor
Scrap Winder Drive Cone
Scrap Winder Idler Cone
Backend Cone Assembly
Flattener Screw Jack (2 of, Left and Right)
Strand Ext Wedges
Strand Ext Bearing Blocks
Strand Ext Backup Roll Flights
610 Bore Mandrel Palms
760 Bore Mandrel Palms
Scrap Arm Ext Cylinder
Entry Coil Car Drag Chain
Exit Coil Car Arms
Scrap Sled Winch
Strand Extensioner - 2 New Spare Work Rolls, 9 Flights Including Backup Rolls

that have been removed

There is also a container of bearings, sprockets and chains, mandrel wedge

pins, clutches, hydraulic motors and various cylinders.

Drawings and Manuals
Tooling Knives, Spacers, & Rubbers

Electrical Equipment
Upgraded Slitter & Recoiler Motors and Drives in 2010
Reliance Maxitron
ABB Digital Drive
Compound Converter
Reliance PLC 45C15 with Remote I/O

OPTIONAL BANDING LINE AVAILABLE:
2100mm (82") X 15,000# Banding Line
Four-Arm Exit Turnstile with Coil Push-Off
82" x 15,000# Right Angle Downender
30' Heavy Duty Powered Conveyor
Signode Banding Head & Table with 3 Powered Conical Rolls
Exit Conveyor

Video of line operating available upon request.


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page