|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
![]() |
FORMING TONNAGE 18
DISTANCE BETWEEN JAWS:
Maximum Length of Part with Tension Cylinders
fully retracted218" (5537.2 mm)
Minimum Length of Part with Tension Cylinders
fully extended 10" (254 mm)
TENSION CYLINDER STROKE each 24? (609.6 mm)
TENSION CYLINDER ROTATION +/- 90 Degrees
ARMS: SWING Simultaneous Arm Motion
Arm swings 10 Forward to 90Back.
WRAPPING SPEED RANGE Adjustable (Variable)
DIE LENGTH at full tonnage and 180 bend:
Minimum 20" (508 mm)
Maximum 72" (1828.8 mm)
DIE TABLE: (Pre drilled & threaded) 5/8"
Working Surface, W x D 87" x 49" (2209.8 x 1244.6mm)
Height Table To Floor 35" (899 mm)
MOTOR DRIVE: Wired 220 volts, 3 Phase 60 Htz
Hydraulic Pump25 H.P. 220 volts
CONTROLS: Hand Push Buttons, with Start and Stop Buttons
EQUIPPED WITH:
1- set 4" (101.6mm) Jaws with Pneumatic Clamping. 2-Die Posts, 2-Hold-
Down Clamps
COMPLETE FACTORY SAFETY GUARDS
Dimensions 90" (2,286mm) W x 168" (4,267.2mm) F-B x 50" (1,270mm) Height
Weight 13000 lbs.
Dimensions with Arm Opened 171" (4,343.4 mm) width (Left to Right)
Hydraulic 30" (762mm) wide x 60" (1,524mm) F-B x 44.5" (1,130.3mm) Ht
RETURN
to complete inventory display
RETURN
to our home page