National Machinery Exchange, Inc. If it's machinery, we have it.SM

   
Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us
Facebook Twitter YouTube

25MM OTO MILLS TUBE MILL MODEL 252, Mfg-2002   Our stock number: 114300



TECHNICAL SPECIFICATIONS
MATERIAL..................Carbon steel
STRIP WIDTH ...............33mm to 110mm
STRIP THICHNESS.............0.7mm to 2mm
TUBE DIAMETER.............10mm to 24.5mm
SQUARE PROFILE SECTIONS.......12 X 12 mm to 20 X 20 mm
RECTANGULAR PROFILE SECTIONS....15 x 10 mm TO 30 X 10 mm
MAXIMUM SPEED.............180 m/min
COOLING SYSTEM..............Emulsion 600 l/min max
WELDING SET-UP.............High Frequency

LINE CONFIGURATION
Line Direction...............Left to Right
ENTRY SECTION
1 - Uncoiler, Double end w/Hydraulic Expansion
1 - Hydraulic Hold Down Roll
1 - Peeler Table
1 - Shear End Welder, Semi- Auto
1 - Accumulator, "Floop" Vertical type

FORMING SECTION
1 - Entry Side Guide Rolls & Vertical Stand
4 - Driven Breakdown Stands
6 - Idle Side Rolls
3 - Driven Fin Stands
Universal Drive
Single Point Adjustment

WELDING SECTION:
1 - Seam Guide Stand
THERMATOOL, Model CFI-300 Hi Freq. Welder, 300 KW *(2) - AVAILABLE BY

NEGOTIATION*
INPUT VOLTAGE 50/60 CYCLE..........380/420 V
OUTPUT POWER (CONTINUOUS).......10-300 KW
NOMINAL FREQUENCY..............400 kHz
1 - 3-Roll Weld Pressure
1 - Scarfing Stand
Adjustment by hand and hydraulic

Coolant Section - Flood Type
Guide Stands

SIZING SECTION
3 - Driven Sizing Stands
3 - Idle Side Rolls
1 - Straightener
4 - Turkshead 4-Roll Stands
Universal Drive
Single Point Adjustment

TUBE MILL MOTOR DRIVE...........(3) - D.C. Motor Solid State
RELIANCE D.C. Drive System

CUT OFF SECTION
Flying Cold Saw Cutoff

TOOLING: AVAILABLE BY NEGOTIATION

COTIMPI FINISHING LINE
*available by negotiation*

TUBE STRAIGHTENING MACHINE
(6) ROLL STRAIGHTENER, MODEL 997 RDZ D42
DIAMETER RANGE................3/8" to 1-1/4" (Pipe Size)
LENGTH RANGE.................5.5 M to 7.5 M
YIELD STRESS LIMIT...............500 N/mm2
MANUAL HEIGHT AND ANGLE ADJUSTMENT

END FACING BATTERY, MODEL 995 INT D42
DOUBLE HEAD END FACING UNITS
DIAMETER RANGE................3/8" to 1-1/4" (Pipe Size)
LENGTH RANGE.................5.5 M to 7.5 M
OUTSIDE BEVEL..................30 Degrees
INSIDE BEVEL....................45 Degrees
# OF PIECES PER MINUTE (Target)......40 to 48.3 (depending on diameter)

HYDRO TESTING BATTERY, MODEL 996 PRO D42
DIAMETER RANGE................3/8" to 1-1/4" (Pipe Size)
LENGTH RANGE.................5.5 M to 7.5 M
MAX. THICKNESS...................4mm
MAX. PRESSURE TESTING..............210 BAR
(2) OPPOSED TESTING HEADS..........(6) Pipes at a time
WASHING STATION................(6) Pipes at a time
TRANSFER AND FEED TABLES
OUTPUT CAPACITY OF BATTERY.........17 to 19 Pipes/Min (depending on diameter)


PACKAGING LINE, Mfg MAIR, 2004 -
*AVAILABLE BY NEGOTIATION*
MAIR PACKAGING LINE, MODEL SQ.HEX90/D/4/SL
ROUND TUBE DIAMETER (MAX)..........76mm
SQUARE TUBES (b x h) ...............16 x 16 to 30 x 30 mm
RECTANGULAR TUBES (b x h) ..........20 x 15 to 440 x 10 mm
WALL THICKNESS OF TUBES............4mm
TUBE LENGTH...................4 to 8M
PACK DIMENSIONS
SQUARE/RETANGULAR............200 x 200 to 600 x 500 mm
HEXAGONAL SIDE................230 x 200 to 600 x 520 mm
MAX. WEIGHT OF BUNDLE..........3,000 Kg

------------------------------------------------------------------------------



THERMATOOL, MODEL CFI-300 HI FREQ. WELDER, 300 KW
(2) *AVAILABLE BY NEGOTIATION *

THERMATOOL, MODEL CFI-300 HI FREQUENCY WELDER
INPUT VOLTAGE 50/60 CYCLE..........380/420 V
OUTPUT POWER (CONTINUOUS).......10-300 KW
NOMINAL FREQUENCY..............400 kHz

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page