National Machinery Exchange, Inc. If it's machinery, we have it.SM

   
Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us
Facebook Twitter YouTube

76MM OTO MILLS TUBE MILL MODEL 766, Mfg-2005   Our stock number: 114302



TECHNICAL SPECIFICATIONS
MATERIAL..................Carbon steel 360N/mm2
STRIP WIDTH ...............78mm to 250mm
STRIP THICHNESS.............2mm to 6mm
TUBE DIAMETER.............25.4mm to 76.2mm
SQUARE PROFILE SECTIONS.......20 x 20mm to 60 x 60mm
RECTANGULAR PROFILE SECTIONS....20 X 40mm TO 80 X 80mm
MAXIMUM SPEED.............140 m/min
COOLING SYSTEM..............Emulsion 600 l/min max
WELDING SET-UP.............High Frequency

LINE CONFIGURATION
Line Direction...............Right to Left
ENTRY SECTION
1 - Uncoiler, Double end w/Hydraulic Expansion
1 - Hydraulic Hold Down Roll
1 - Peeler Table
1 - Shear End Welder, Semi- Auto
1 - Accumulator, "Floop" Vertical type

FORMING SECTION
1 - Entry Side Guide Rolls & Vertical Stand
4 - Driven Breakdown Stands
6 - Idle Side Rolls
3 - Driven Fin Stands
Universal Drive
Single Point Adjustment

WELDING SECTION:
1 - Seam Guide Stand
THERMATOOL, MODEL CFI-300 HI FREQ. WELDER, 300 KW * (2) AVAILABLE BY

NEGOTIATION*
INPUT VOLTAGE 50/60 CYCLE..........380/420 V
OUTPUT POWER (CONTINUOUS).......10-300 KW
NOMINAL FREQUENCY..............400 kHz
1 - 3-Roll Weld Pressure
Adjustment by hand and hydraulic - Scarfing Stand


Coolant Section - Flood Type
Guide Stands

SIZING SECTION
3 - Driven Sizing Stands
3 - Idle Side Rolls
1 - Straightener
4 - Turkshead 4-Roll Stands
Universal Drive
Single Point Adjustment

TUBE MILL MOTOR DRIVE...........(3) - D.C. Motor Solid State
RELIANCE D.C. Drive System

CUT OFF SECTION
Flying Cold Saw Cutoff

TOOLING: AVAILABLE BY NEGOTIATION

COTIMPI FINISHING LINE

TUBE STRAIGHTENING MACHINE
(6) ROLL STRAIGHTENER, MODEL 994 RDZ D76
DIAMETER RANGE................1/2" to 2-1/2" (Pipe Size)
LENGTH RANGE.................5.5 M to 7.5 M
MANUAL HEIGHT AND ANGLE ADJUSTMENT

END FACING BATTERY, MODEL 992 INT D76
DOUBLE HEAD END FACING UNITS
DIAMETER RANGE................1/2" to 2-1/2" (Pipe Size)
LENGTH RANGE.................5.5 M to 7.5 M
OUTSIDE BEVEL..................30 Degrees
INSIDE BEVEL....................45 Degrees
# OF PIECES PER MINUTE (Target)......24 to 45.3 (depending on diameter)

HYDRO TESTING BATTERY, MODEL 993 PRO D76
DIAMETER RANGE................1/2" to 2-1/2" (Pipe Size)
LENGTH RANGE.................5.5 M to 7.5 M
MAX. THICKNESS...................4mm
MAX. PRESSURE TESTING..............210 BAR
(2) OPPOSED TESTING HEADS..........(6) Pipes at a time
WASHING STATION................(6) Pipes at a time
TRANSFER AND FEED TABLES
OUTPUT CAPACITY OF BATTERY.........13 to 19 Pipes/Min (depending on diameter)

PACKAGING LINE, Mfg 2004
MAIR PACKAGING LINE, MODEL SQ.HEX90/D/4/SL
TUBE DIAMETER (MAX)..............76mm
WALL THICKNESS OF TUBES............4mm
TUBE LENGTH...................4 to 8M
PACK DIMENSIONS
SQUARE/RETANGULAR............200 x 200 to 600 x 500mm
HEXAGONAL SIDE................230 x 200 to 600 x 520mm
MAX. WEIGHT OF BUNDLE..........3,000 Kg

------------------------------------------------------------------------------

THERMATOOL, Model CFI-300 Hi Freq. Welder, 300 KW (2) Available
INPUT VOLTAGE 50/60 CYCLE..........380/420 V
OUTPUT POWER (CONTINUOUS).......10-300 KW
NOMINAL FREQUENCY..............400 kHz

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page