|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
![]() |
Nedschroef Model MW53 Hot Forming Production Line, Built new in 1995
Range: M20-M33
Maximum Across Flats Hex Nuts:53mm
Maximum Across Flats Square Nuts:41mm
Maximum Diameter Products:55mm
Maximum Product Height:45mm
Minimum Product Height:13mm
Strokes per Minute: 150
Maximum Bar Diameter New Material:44mm
Maximum Cutoff Length:65mm
Minimum Cutoff Length:14mm
Diameter Feed Rollers: 180mm
Slide Travel:180mm
Forging Pressure in Tons:130
Motor Output in Kw:65
Weight in Tons:22
Floorspace in Cm (without heating): 480 x 280
Cooling Water Consumption liter/min.:150
1. MW53 capable to produce hexagon nuts from M20 up to M36 as well as flange
nuts.
2. Newelco SFR 29 1.275 Kw Induction heater with 3 Coil sections ( sufficient
to heat bar for production of M36 nuts at 100 pcs./min)
3. Bar Rack for 6 meter long bars complete with automatic bar feeding system
4. Conveyor System for products and for scrap
5. Various sets of tooling for hexagon nuts ( to be specified)
6. Various spare parts for MW53 and induction heater
Line has been disassembled and removed from production and put into storage in
2016
RETURN
to complete inventory display
RETURN
to our home page