National Machinery Exchange, Inc. If it's machinery, we have it.SM

   
Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us
Facebook Twitter YouTube

72" x .375" x 60,000# Loop Slitting Line   Our stock number: 114594

72 x .375 x 60,000# Loop Slitting Line

Click on picture below for larger version
72 x .375 x 60,000# Loop Slitting Line72 x .375 x 60,000# Loop Slitting Line72 x .375 x 60,000# Loop Slitting Line72 x .375 x 60,000# Loop Slitting Line

72" x .375" x 60,000# Loop Slitting Line


Materials: HRS, CRS, Galv.
Coil Width Range: 12" - 72"
Thickness Range: 0.024 - 0.375"
Max. Shear: 45,000 PSI
Max. Yield: 45,000 PSI
Max. Coil Weight: 60,000#
Coil I.D. (Entry): 20" - 24"
Coil I.D. (Exit): 20" & 24"
Max. Coil O.D.: 72"
Line Direction: Left to Right
Mode of Operation: Pull-thru/ Slitter Assist
Approx. Line Speeds: 100/200/300 FPM @ 24" Dia. Bare Drum Speed
Required Floor Space: 50' x 90' (approx.)

Consisting of the following:

-Entry Turnstile:
Three (3) arms x 60,000# per arm
Powered Rotation
Slotted for C-Hooks

-Entry Coil Car:
Mast Type
Floor Mounted
Self-contained Hydraulic Unit
Powered Lift and Traverse
Cable Reel

-Uncoiler:
Single Mandrel Type
Powered Expansion
Hold-down with Powered Snubber Roll
Wichita Water Cooled Brake with Cooler
Slide Base
Feed-up Drive

-Entry Unit:
Extending Blade Type Peeler
Entry Pass-line Roll
Manual Side Guides
Powered Entry Pinch Rolls
Crop Shear- Down-cut Type
Carry-over Table

-Two (2) Slitter Heads:
Crane Removable Type
10" Diameter Arbors
Powered Outboard Retraction
Powered Top Arbor Adjust
"Over the Arbor" design to slit 36" through 72" widths

-Stationary Slitter Drive Base:
75 HP DC Motor (650/1950 RPM)
H & S Speed Reducer (27.43:1 Ratio)
Powered Head Lock

-Pit Section:
Mounted to Tension Stand
Entry Pass-line Roll
Carry-over Table

-Tension Stand: Coil Pro, New in 2000
Drag Type
Clam Shell Opening
Separator Arm on Slide-out Frame
Internal Deflector Rolls
Exit Crop Shear- Down-cut Type
Recoiler Feed Table

-Two (2) Scrap Winders:
Automatic Scrap Dump
Level Wind

-Recoiler:
Chicago Recoiler Drum, New in 2008
20" Dia. Drum
Hydraulic Expansion and Gripper
Hydraulic Push-off
Internal Gear Reduction: approx. 50:1
100 HP DC Motor (650/1950 RPM)
Drive-all Reducer with three (3) speeds
Ratios - 1:1, 1.562:1 and 3:1
Bolt-on Risers for 24" ID

-Overarm Separator Assembly:
Floor Mounted
Banding Assist Arm

-Exit Coil Car:
Mast Type
Floor Mounted
Self-contained Hydraulic Unit
Powered Lift and Traverse
Narrow Coil Retaining Tracks
Cable Reel

-Entry Turnstile:
Two (2) arms x 60,000# per arm
Powered Rotation
Powered Push-off
Slotted for C-Hooks

-Electrical Controls: New in 2006
Main Operators Control Panel with Touch Screen Control
AC/DC Control Cabinets
Eurotherm 590+ DC Drives

-Hydraulic System:

-Tooling: Shimless
Multiple sets of Tooling
Knives
1" Knives new in 2019 (never used)
Steel Spacers
Rubbers
Separator Tooling

-New AC/DC Controls were added in 2006 at a cost of around $125,000.

-New Chicago Recoiler Drum was added in 2008 at a cost of around $150,000.


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page