National Machinery Exchange, Inc. If it's machinery, we have it.SM

   
Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us
Facebook Twitter YouTube

VERSAFORM MODEL DB70T EXTRUSION STRETCH WRAP FORMING MACHINE   Our stock number: 114901

VERSAFORM MODEL DB70T EXTRUSION STRETCH WRAP FORMING MACHINE

Click on picture below for larger version
VERSAFORM MODEL DB70T EXTRUSION STRETCH WRAP FORMING MACHINEVERSAFORM MODEL DB70T EXTRUSION STRETCH WRAP FORMING MACHINEVERSAFORM MODEL DB70T EXTRUSION STRETCH WRAP FORMING MACHINE

Model DB70T, Serial Number 169-SF-002

SPECIFICATIONS
FORMING TONNAGE 70
JAW AXIAL ROTATION +/- 180 Degrees
DISTANCE BETWEEN JAWS 334" (8,483.6 mm)
OPERATING (psi) 2,000
TENSION CYLINDER STROKE 30" (762 mm)
TENSION CYLINDER SPEED, up to 30 ipm (762 mm/min.)
TENSION CYLINDER ROTATION +/- 25 Degrees
ARM SWING (Each Arm) Independent
10 Degrees Forward to 90 Degrees Back.
WRAPPING SPEED RANGE Adjustable
DIE LENGTH at FULL TONNAGE and 180 degrees Wrap:
Minimum18" (457 mm)
Maximum 72" (1829 mm)
DIE TABLE: (4) FB-Slots & 3 LR Slots
Working Surface, W x D 72" x 48" (1,828 mm x 1,219.2 mm)
Height Table To Floor 36" (914 mm)
(62) Pre-Drilled & Threaded Holes
MOTOR DRIVE: Wired 460 volts, 3 Phase
Hydraulic Pump Swing Arms 50 hp. 230/460 volts
Hydraulic Pump Pull Back Cylinders 40 hp. 230-460 volts
Hydraulic Oil Cooler Fan. 1/3 hp
CONTROLS: Hand Push Buttons, with Start and Stop Buttons
EQUIPPED WITH: (1) set 8" (203.2mm) Gripper Jaws
(1) 6" (152.4mm) dimeter Jaw Cone 1 set of Die Holder L Plates each

24" LR x 18" Ht
1-set Tool Post Adjustable (threaded) 5" (127mm) diameter x 11" (279.4mm)

Adjustable Height
1-set V-Top Tool Holder 9" (228.6mm) Adjustable Height
1-lot Miscellaneous Bolts, Wrenches and Blocking)
COMPLETE FACTORY SAFETY GUARDS

Dimensions Machine 96" LR x 180" FB x 103" Height
(2,438.4mm LR x 4,572mm FB x 2,616.2 Height)
Dimensions, Operator Control Station 48" LR x 56" FB x 55" Height
(1,219.2mm LR x 1,422.4mm FB x 1397mm Height)
Weight Approximate 38,000 lbs.

NOTE PIT REQUIRED: All hydraulic lines from machine to operator control

station run beneath forming table.




VERSA FORM EXTRUSION STRETCH FORMER
MODEL DB70T


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page