National Machinery Exchange, Inc. If it's machinery, we have it.SM

   
Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us
Facebook Twitter YouTube

VERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESS   Our stock number: 114988

VERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESS

Click on picture below for larger version
VERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESSVERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESSVERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESSVERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESS
VERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESSVERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESSVERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESS

Model 29000R-50-116, FLEX-DIE RUBBER PAD, Serial Number 27296

SPECIFICATIONS: FLUID FORMING
CAPACITY TONNAGE 29,000
FORMING PRESSURE: thru................. 10,000 P.S.I.

TRAYS: Two
Tray Size at Top ..................... 50" x 116" (1,270mm x

2,946.4mm.)
Right Tray Area at a 6 inch (152.4mm) Depth...... 42" x 109"

(1,079.5mm x 2,768.6mm)
Left Tray Area at a 10 inch (254mm) Depth ....... 37_" x 104"

(958.85mm x 2,641.6mm)

MOTOR DRIVES: All motors wired 440 volts, 3 phase
(2) Evacuate High Pressure Pumps ............ 75 H.P. & 150 H.P.
(1) ACC Pump ...................... 30 H.P.
(1) Pilot Pump..................... 20 H.P.
(1) Vacuum Pump.................... 15 H.P.
(1) Filter Pump.................... 1/4 H.P.

CONTROLS: Wired 115 volts
Operator Control Station located center of barrel.
(2) Side Controls Stations located at end of each Barrel with

emergency Stop Buttons.

EQUIPPED WITH:
(1) Power Unit and Oil Reservoir.
(1) Nitrogen Intensifier Pump.
(2) Throw Pad Roll-Up Device for each Table.

(1) Accumulator hydraulic Oil Storage Tank.
(1) Fluid cell
(1) Rubber Pad
Electrical Starter Panels.


COMPLETE FACTORY SAFETY GUARDS



Dimensions 342.16" (8,690.86mm) L-R x 120" (3,048mm) FB x 1873/8" (4,759,3mm)

Height with Fill Lines.

Main Chamber with Fill Lines, Height above Ground 161 7/8" (428.63mm)
Power Unit and Oil Reservoir F-B 96" x 178" (2,438.4mm x4,521.2mm.

Intensifier 33" x 33" x 132" Ht. (38.2mm x 838.2mm x 3,352.8mm)

Accumulator 80" diameter x 186" Ht. Control Panel 144" LR x 18" FB x 91" Ht.


Approx. Wt. 363,700 lbs.

(2,032mm diameter x 4,724.4mm ht.) (3,657.6mm FB x 457.2 FB x 2,311.4mm Ht.





Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page