If it's machinery, we have it.SM

Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us

ACHENBACH / Rebuilt by MINO Reversion Mill, complete with fume extraction.
Installed power is 2,300 kW.

Features include:
Coil diameters: 400 / 600
Coil Outside Diameter: 1,600 mm
Strip width: 440-1,040 mm
Thickness: 0.2 - 4.0 mm
Maximum speed: 200 m/min
Prosol NT70 emulsion (2.5%)
Superstack Filtration System
AGC using screwdowns and Hydraulic Gap Control
Siemens S7-400 PLC
Line Direction: Left to Right

Work rolls:
Dia = 330 to 291mm
Face length = 1140mm

Backup rolls:
Dia = 780 to 740mm
Face length = 1080mm

The mill includes:
Coil Entry
Coil Car, Underground

Uncoiler
Hydraulic drum expansion
Snubber Control Arm, hydraulic drive
Motor: 120kw DC drive
Mandrel OD: 500 - 700mm

Peeler table
Edge guiding rolls
Pinch roll stand
Transport table

4HI Achenbach-Mino Reversing Mill:

LEFT WINDER with Hydraulic push-off plate
Mandrel OD: 500mm
2 x 200kW 450V DC motor
Underground coil car
Transport table with hold down roll
Pinch rolls
Crop shear
Edge guiding rolls
3 - roll straightener

4HI Reversing Mill
AGC, Roll Bending and Roll Balancing
Motorized screw down + Pancake cylinder
Mill motor: 2 x 450kw - 450V DC
Back-up rolls: 1050mm width x 800mm diameter
Roll Change Sled


RIGHT SIDE WINDER
Mandrel OD: 500mm
3 - roll straightener
Edge guides
Crop shear
Pinch rolls
Transport table with hold down roll
Belt wrapper
Motor Drive: 2 x 200kW - 450V

RETURN to complete inventory display       RETURN to our home page