If it's machinery, we have it.SM

Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us

MINO Milling Line incorporates top and bottom full width milling knives as

well as edge milling heads together with a complete dust and chip extraction

system supplied by DIZETA.

The line occupies approximately 300 m2 with an installed electrical power of

400 kW.

The system utilizes oil lubrication and processes:

Strip width: 560-1,052 mm
Thickness: 17.5 mm
Speed: 4-9 m/min
Line Direction: Right to left
Exit Upcoiler
Milling Knife Washing Unit.
Cutting roll dimensions: 1250mm x 250mm

Line Configuration
Pay - off:
Uncoiler with Snubber Control Roll Arm
Mandrel OD: 500 + 600mm (LEAFS)
Underground coil car
Motor Drive: 10kW- 400V DC
Peeler table
Edge guiding rolls, Hydr Adjustment
Pinch roll stand - 11kW AC drive

Precision Leveler, 9 Roll
Individual spindle adjustment for top rolls

Side Edge Milling Unit
200kW- 230/400V DC
Dege Guide Rolls
Chip vacuum system

Mill entry section:
Pinch rolls, (2) stands - 12.5kW DC drive per roll set
Bottom Milling Knife + pressure roll
250kW AC drive @400/690V 50Hz
Pinch rolls, (2) stands - 12.5kW DC drive per roll set
Scrap collection
Roll change sledge

Mill exit section:
Pinch rolls, (2) stands - 12.5kW DC drive per roll set
Top Milling Knife + Pressure Roll - 250kW AC drive @400/690V 50Hz
Pinch rolls, (2) stands - 12.5kW DC drive per roll set
Scrap collection
Roll change sledge

Re-coiling:
Upcoiler - 40kW - 400V DC drive
Spare milling Knives (12) to be confirmed

RETURN to complete inventory display       RETURN to our home page