If it's machinery, we have it.SM

Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us

Click on picture below for larger version

MANUFACTURER - MECO, BRADBURY, BUTECH, STRILICH
STATUS - INSTALLED & OPERATING

YEAR - 1998 (WITH UPGRADES)
LINE DIRECTION - LEFT to RIGHT
MATERIALS - HOT ROLLED STEEL (PICKLED or BLACK)
THICKNESS - 12.7 mm (.500") MAX., 1.7 mm (.065") MIN.
COIL WIDTH - 2489 mm (98") MAX., 1219 mm (48") MIN.
COIL WEIGHT - 40823 kg (90,000#) MAX.
COIL OUTSIDE DIAMETER - 2134 mm (84") MAX., 1219 mm (48") MIN.
COIL INSIDE DIAMETER - 711 mm (28") to 813 mm (32")
CUT SHEET LENGTH - 18288 mm (720") MAX., 1219 mm (48") MIN.
MAX. BUNDLE HEIGHT - 610 mm (24")
MAX. BUNDLE WEIGHT - 36287 kg (80,000#) PER 6096 mm (240") CONVEYOR SECTION
LINE SPEED - 76 MPM (250 FPM) MAX. BELOW 6.35 mm (.250") THICK and 46 MPM (150

FPM) MAX. ABOVE 6.35 mm (.250") THICK

LINE COMPONENTS:

ENTRY COIL STORAGE SADDLES w/ SPACE FOR SEVEN (7) MAXIMUM WIDTH COILS

ENTRY COIL WEIGH STATION

FLOOR LEVEL COIL LOADING CAR #1 (PERPENDICULAR TRAVEL TO UNLOAD SADDLES)

FLOOR LEVEL COIL LOADING CAR #2 (PARALLEL TRAVEL TO LOAD UNCOILER)

DUAL EXPANDING MANDREL UNCOILER
(1) 55.9 Kw (75 HP) DRIVE ON EACH MANDREL

PIVITING HOLD DOWN ROLL
TWO (2) DRIVEN ROLLS AND HEAVY DUTY ANVIL TO ASSIST BACK BENDING WITH THE

PEELER

PIVOTING AND TELESCOPING PEELER BLADE w/ REPLACEABLE TIP

FIVE (5) ROLL ENTRY PINCH ROLL AND FLATTENER ASSEMBLY
(1 )55.93 Kw (75 HP) DRIVE

ENTRY CROP SHEAR AND SCRAP DISPOSAL SYSTEM

TEMPER MILL THREADING TABLE

MECO FOUR (4) HIGH NON-REVERSING TEMPER MILL
(2) 482.6 mm (19") DIAMETER WORK ROLLS
(2) 1117.6 mm (44") DIAMETER BACKUP ROLLS
(2) 372.85 Kw (500 HP) DRIVES

STRIP ACCUMULATION TABLE w/ ENTRY DEFLECTOR ROLLS, ELEVATING HUMP ROLL & EXIT

DEFLECTOR ROLLS

PLATE TYPE STRIP CENTERING GUIDES

LEVELER ENTRY PINCH ROLL ASSEMBLY
(1) 36.78 Kw (50 HP) DRIVE

BRADBURY HEAVY GAUGE ELEVEN (11) ROLL FOUR (4) HIGH HYDRAULIC LEVELER
(11 )171.5 mm (6.75") DIAMETER WORK ROLLS
(7) ADJUSTABLE BACKUP FLIGHTS
(1) 447.42 Kw (600 HP) DRIVE

STRIP INSPECTION TABLE

BRADBURY LIGHT GAUGE ELEVEN (11) ROLL FOUR (4) HIGH HYDRAULIC LEVELER
(11) 88.9 mm (3.50") DIAMETER WORK ROLLS
(9) ADJUSTABLE BACKUP FLIGHTS
298 Kw (400 HP) DRIVE


INKJET STRIP MARKING SYSTEM
MATTHEWS STENCILER SYSTEM (MPERIA V-SERIES VIAJET DOD MARKING SYSTEM)

PLATE TYPE STRIP CENTERING GUIDES

SHEAR ENTRY PINCH ROLL ASSEMBLY
(1) 11 Kw (15 HP) DRIVE

BUTECH SINGLE RAKE OSCILLATING SHEAR w/ QUICK CHANGE KNIFE ASSEMBLY
(1) 221 Kw (300 HP) OSCILLATING DRIVE & (1) 110 Kw (150 HP) RAM DRIVE

CUT SHEET TRANSFER CONVEYOR w/ NON-MARKING BELTS AND PIVOTING REJECT STATION

STACKER DECELERATION ROLLS

STRILICH SHEET STACKER
THREE (3) 6.1 METER (20 FOOT) ZONES
ADJUSTABLE END STOP
PIVOTING SUPPORT ARMS
POWERED SQUARING GUIDES

60' END DISCHARGE STACKER RUNOUT CONVEYORS w/ DRIVEN ROLLERS

60' NINETY (90) DEGREE ROTATING CONVEYOR w/ DRIVEN ROLLERS

60' OFFLINE STORAGE CONVEYOR #1 w/ DRIVEN ROLLERS

60' OFFLINE STORAGE CONVEYOR #2 w/ DRIVEN ROLLERS

60' OFFLINE STORAGE CONVEYOR

OPERATOR CONTROL STATIONS

AC CONTROLS

VARIABLE SPEED DRIVE CONTROLS

CLOSED LOOP HYDRAULIC SYSTEM

RETURN to listing display       RETURN to our home page