National Machinery Exchange, Inc. If it's machinery, we have it.SM

   
Home | About Us | Inventory | Selected Transactions | Specialty Areas | Newsletters | Contact Us
Facebook Twitter YouTube

WATERBURY FARREL 12HI "SENDZIMIR" ZR19-25 COLD ROLLING MILL   Our stock number: 113555

WATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILL

Click on picture below for larger version
WATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILLWATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILLWATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILLWATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILL
WATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILLWATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILLWATERBURY FARREL 12HI SENDZIMIR ZR19-25 COLD ROLLING MILL


SPECIFICATIONS:

MANUFACTURER: WATERBURY FARREL FOUNDRY & MACHINE (USA)
TYPE: 12-HI PRECISION COLD REVERSING ROLLING MILL
WITH AGC (AUTOMATIC GAUGE CONTROL)
MATERIAL: BRASS LOW CARBON, COPPER
NOMINAL CAPACITY: ZR 19-25

MAXIMUM INCOMING THICKNESS: 0.118 (3.0mm)
MINIMUM FINISH THICKNESS: 0.0078" (2.0mm)
MAXIMUM COIL WEIGHT: 6,000 KG
SPEED RANGE: 0-220m/Min.
MAXIMUM TENSION: 9,000 KG
AUTOMATIC GAUGE CONTROL SYSTEM: NEW 2010
TYPE: MASS FLOW
THICKNESS GAUGES: GAMMA

MILL CROWN CONTROL: MOTORIZED, "C" SHAFT
NOMINAL WORK ROLL DIAMETER: 2.06" (52.3MM)
BACKING BEARING DIAMETER: 8.858" (225mm)

ROLL WIPERS ON ENTRY AND EXIT SIDES - DOUBLE ROLLER, AIR BLOW

THE MILL CONSISTS OF:

LEFT AND RIGHT WINDERS:
REVERSE PYRAMID WINDERS
MANDREL DIAMETER: 19 1/2"- 20" (495mm - 508mm)
MANDREL FACE: 28" (711mm)
COIL PUSH-OFF: HYDRAULIC
COIL CAR
RIGHT COIL WINDER REBUILT IN 2010
DRIVE MOTOR: 230/230/230KW; 578/600/600 VOLT; 450/470/1200RPM
ABB DC MOTOR DRIVE, DCS800
UPGRADED IN 2010

MAIN MILL:
MINERAL OIL MIST COOLANT SYSTEM: HILLARD MODEL F3-21
GAMMA GAUGES BOTH SIDES: HICO HYFLOW FILTER, CARTRIDGE
AUTOMATIC GAUGE CONTROL SYSTEM: PAULY SYSTEMS
TENSIOMETER ROLL
DRIVE MOTOR: 500 HP, 600 VOLTS, 670RPM
UPGRADED IN 2010

INCLUDES ONE SET OF BACKUP BEARINGS
BACKING BEARING DIAMETER: 8.858" (225mm)
INTERMEDIATE DRIVE ROLL DIAMETER: 4.1875" (106.36mm)
WORK ROLL DIAMETER (NOMINAL): 2.06" (52.3mm)

INCLUDES INVENTORY OF WORK AND INTERMEDIATE ROLLS AND SPARE PARTS
INCLUDES ALL LUBRICATION TANKS, PUMPS, PIPING, SPARES, DRAWINGS,

CONTROLS, OPERATOR STATIONS, FUME EXHAUST SYSTEM

MILL IS STILL INSTALLED


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to listing display       RETURN to our home page