|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
96.5" (2450MM) X 25MM X 70,000# CUT-TO-LENGTH LINE
COIL WEIGHT70000 POUNDS
WIDTH96.5 INCHES
THICKNESS.984 INCHES
ID32 INCHES
MAX OD94.5 INCHES
EQUIPPED WITH
YEAR: 2010
MATERIAL: HOT ROLLED STEEL STRIP (SS, S55C, SPAH, DAS, ATS ETC.)
THICKNESS: 3.2MM - 25MM
COIL WEIGHT: 35 TONS
COIL ID: 508MM, 610MM, 762MM, 812MM
COIL OD: 1,000MM - 2,400MM
COIL WIDTH: 900MM - 2,500MM
PLATE LENGTH: 2,000MM - 24,000MM
WORKING SPEED: MAX 27 MPM OR 17 MPM (2 STEP CHANGEABLE)
MOTOR POWER
ROUGH LEVELER: 400 KW DC
SCRAP CHOPPER: 63 KW X 1 SET, DC
1ST FINISH LEVELER: 264 KW DC
2ND FINISH LEVELER: 266 KW DC
FLYING SHEAR: 75 KW AC, 55 KW AC SERVO
COMPLETE CUT-TO-LENGTH LINE CONSISTING OF THE FOLLOWING COMPONENTS:
COIL CAR
UNCOILER
PINCH & ROUGH LEVELER
SURFACE BRUSHING UNIT W/ DUST COLLECTOR
SIDE TRIMMER & SCRAP CHOPPER W/ DISPOSAL UNIT
THREADING TABLE
1ST FINISH LEVELER
THREADING TABLE
2ND FINISH LEVELER
STRIP PRESS ROLLER
MEASURING ROLLER
FLYING SHEAR W/ TRAVERSE DEVICE
RUN OUT BELT TABLE
REJECT TABLE W/ SCRAP CAR
INSPECTION TABLE
SETTING ROLLER BEFORE PILING
NO. 1 & 2 PILERS
PILING ROLLER TABLE FOR SHOT PLATE
PILING TABLE FOR LONG PLATE
RECEIVING TABLE
HYDRAULIC CONTROL UNIT (ENTRY & EXIT)
ELECTRIC CONTROL PANEL (FOR MOTOR DRIVE, AC CONTROL, SERVO CONTROL, PLC,
AUXILIARY)
OPERATOR DESK
INSTALLED AND UNDER POWER
RETURN
to our home page