| |
 |
 |
If it's machinery, we have it.SM
|
|
 |
| |
|
 |
 |
|
|
|
| |
|
|
| |
WATERBURY FARREL 12HI "SENDZIMIR" ZR19-25 COLD ROLLING MILL
Our stock number:
113555
Click on picture below for larger version
SPECIFICATIONS:
MANUFACTURER: WATERBURY FARREL FOUNDRY & MACHINE (USA)
TYPE: 12-HI PRECISION COLD REVERSING ROLLING MILL
WITH AGC (AUTOMATIC GAUGE CONTROL)
MATERIAL: BRASS LOW CARBON, COPPER
NOMINAL CAPACITY: ZR 19-25
MAXIMUM INCOMING THICKNESS: 0.118 (3.0mm)
MINIMUM FINISH THICKNESS: 0.0078" (2.0mm)
MAXIMUM COIL WEIGHT: 6,000 KG
SPEED RANGE: 0-220m/Min.
MAXIMUM TENSION: 9,000 KG
AUTOMATIC GAUGE CONTROL SYSTEM: NEW 2010
TYPE: MASS FLOW
THICKNESS GAUGES: GAMMA
MILL CROWN CONTROL: MOTORIZED, "C" SHAFT
NOMINAL WORK ROLL DIAMETER: 2.06" (52.3MM)
BACKING BEARING DIAMETER: 8.858" (225mm)
ROLL WIPERS ON ENTRY AND EXIT SIDES - DOUBLE ROLLER, AIR BLOW
THE MILL CONSISTS OF:
LEFT AND RIGHT WINDERS:
REVERSE PYRAMID WINDERS
MANDREL DIAMETER: 19 1/2"- 20" (495mm - 508mm)
MANDREL FACE: 28" (711mm)
COIL PUSH-OFF: HYDRAULIC
COIL CAR
RIGHT COIL WINDER REBUILT IN 2010
DRIVE MOTOR: 230/230/230KW; 578/600/600 VOLT; 450/470/1200RPM
ABB DC MOTOR DRIVE, DCS800
UPGRADED IN 2010
MAIN MILL:
MINERAL OIL MIST COOLANT SYSTEM: HILLARD MODEL F3-21
GAMMA GAUGES BOTH SIDES: HICO HYFLOW FILTER, CARTRIDGE
AUTOMATIC GAUGE CONTROL SYSTEM: PAULY SYSTEMS
TENSIOMETER ROLL
DRIVE MOTOR: 500 HP, 600 VOLTS, 670RPM
UPGRADED IN 2010
INCLUDES ONE SET OF BACKUP BEARINGS
BACKING BEARING DIAMETER: 8.858" (225mm)
INTERMEDIATE DRIVE ROLL DIAMETER: 4.1875" (106.36mm)
WORK ROLL DIAMETER (NOMINAL): 2.06" (52.3mm)
INCLUDES INVENTORY OF WORK AND INTERMEDIATE ROLLS AND SPARE PARTS
INCLUDES ALL LUBRICATION TANKS, PUMPS, PIPING, SPARES, DRAWINGS,
CONTROLS, OPERATOR STATIONS, FUME EXHAUST SYSTEM
MILL IS STILL INSTALLED
RETURN
to listing display
RETURN
to our home page
